lejos.remote.ev3

Class RemoteI2CPort

java.lang.Object

lejos.remote.ev3.RemoteIOPort

lejos.remote.ev3.RemoteI2CPort

All Implemented Interfaces:

java.io.Closeable, java.lang.AutoCloseable, BasicSensorPort, I2CPort, IOPort, EV3SensorConstants, SensorConstants

public class RemoteI2CPort
extends RemoteIOPort
implements I2CPort

Field Summary

Fields

Modifier and Type	Field and Description
protected RMII2CPort	rmi
protected RMIEV3	rmiEV3

Fields inherited from class lejos.remote.ev3.RemoteIOPort

currentMode, openPorts, port, ref, typ

Fields inherited from interface lejos.hardware.port.I2CPort

MAX_IO

Fields inherited from interface lejos.hardware.sensor.SensorConstants

BLACK, BLANK_INDEX, BLUE, BLUE_INDEX, BROWN, GREEN, GREEN_INDEX, MAX_TYPE, MIN_TYPE, MODE_RAW, NXT_ADC_RES, RED, RED_INDEX, TYPE_ANGLE, TYPE_COLORBLUE, TYPE_COLORFULL, TYPE_COLORGREEN, TYPE_COLORNONE, TYPE_COLORRED, TYPE_CUSTOM, TYPE_HIGHSPEED, TYPE_HIGHSPEED_9V, TYPE_HISPEED, TYPE_LIGHT_ACTIVE, TYPE_LIGHT_INACTIVE, TYPE_LOWSPEED, TYPE_LOWSPEED_9V, TYPE_NO_SENSOR, TYPE_REFLECTION, TYPE_SOUND_DB, TYPE_SOUND_DBA, TYPE_SWITCH, TYPE_TEMPERATURE, WHITE, YELLOW

Fields inherited from interface lejos.hardware.sensor.EV3SensorConstants

ADC_REF, ADC_RES, CMD_AUTOMATIC, CMD_COL_AMB, CMD_COL_BLU, CMD_COL_COL, CMD_COL_GRN, CMD_COL_RED, CMD_CONNECTED, CMD_DISCONNECTED, CMD_FLOAT, CMD_NONE, CMD_PIN1, CMD_PIN5, CMD_SET, CONN_DAISYCHAIN, CONN_ERROR, CONN_INPUT_DUMB, CONN_INPUT_UART, CONN_NONE, CONN_NXT_COLOR, CONN_NXT_DUMB, CONN_NXT_IIC, CONN_OUTPUT_DUMB, CONN_OUTPUT_INTELLIGENT, CONN_OUTPUT_TACHO, CONN_UNKNOWN, IIC_DATA_LENGTH, MAX_DEVICE_DATALENGTH, MOTORS, PORTS, STATUS_BUSY, STATUS_FAIL, STATUS_OK, STATUS_STOP, TYPE_ERROR, TYPE_IIC_UNKNOWN, TYPE_MINITACHO, TYPE_NEWTACHO, TYPE_NONE, TYPE_NXT_COLOR, TYPE_NXT_IIC, TYPE_NXT_LIGHT, TYPE_NXT_SOUND, TYPE_NXT_TEST, TYPE_NXT_TOUCH, TYPE_TACHO, TYPE_TERMINAL, TYPE_THIRD_PARTY_END, TYPE_THIRD_PARTY_START, TYPE_UNKNOWN, UART_MAX_MODES

Constructor Summary

Constructors

Constructor and Description
RemoteI2CPort(RMIEV3 rmiEV3)

Method Summary

Modifier and Type	Method and Description
void	close() Close the port, the port can not be used after this call.
void	i2cTransaction(int deviceAddress, byte[] writeBuf, int writeOffset, int writeLen, byte[] readBuf, int readOffset, int readLen) High level i2c interface.
boolean	open(int typ, int portNum, RemotePort remotePort)
boolean	setType(int type) Set the operating type for the attached sensor.

Methods inherited from class lejos.remote.ev3.RemoteIOPort

getMode, getName, getType, setMode, setPinMode, setTypeAndMode

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface lejos.hardware.port.IOPort

getName, setPinMode

Methods inherited from interface lejos.hardware.port.BasicSensorPort

getMode, getType, setMode, setTypeAndMode

Field Detail

rmi

protected RMII2CPort rmi

rmiEV3

protected RMIEV3 rmiEV3

Constructor Detail

RemoteI2CPort

public RemoteI2CPort(RMIEV3 rmiEV3)

Method Detail

open

public boolean open(int typ,
                    int portNum,
                    RemotePort remotePort)

Overrides:

open in class RemoteIOPort

close

public void close()

Description copied from interface: IOPort

Close the port, the port can not be used after this call.

Specified by:

close in interface java.io.Closeable

Specified by:

close in interface java.lang.AutoCloseable

Specified by:

close in interface IOPort

Overrides:

close in class RemoteIOPort

i2cTransaction

public void i2cTransaction(int deviceAddress,
                           byte[] writeBuf,
                           int writeOffset,
                           int writeLen,
                           byte[] readBuf,
                           int readOffset,
                           int readLen)

Description copied from interface: I2CPort

High level i2c interface. Perform a complete i2c transaction and return the results. Writes the specified data to the device and then reads the requested bytes from it.

Specified by:

i2cTransaction in interface I2CPort

Parameters:

deviceAddress - The I2C device address.

writeBuf - The buffer containing data to be written to the device.

writeOffset - The offset of the data within the write buffer

writeLen - The number of bytes to write.

readBuf - The buffer to use for the transaction results

readOffset - Location to write the results to

readLen - The length of the read

setType

public boolean setType(int type)

Description copied from interface: BasicSensorPort

Set the operating type for the attached sensor. Normally type setting is only used with legacy sensors and for i2c devices (to set the speed and operating voltage). It is not normally used with EV3 sensors.

Specified by:

setType in interface BasicSensorPort

Overrides:

setType in class RemoteIOPort

Returns:

true if type accepted